XTD (? 360) ceramic multi - pipe dust collector structure

Ceramic multi-pipe dust collector is a dust removal equipment composed of several parallel ceramic cyclone dust collector units (also known as ceramic cyclone body). It may consist of a general ceramic cyclone unit or a DC cyclone unit, which are organically combined in a housing with a total intake pipe, exhaust pipe and ash hopper. Ash bucket ash can have a variety of forms, because the equipment is composed of ceramic cyclone pipe, it is more wear-resistant than cast iron pipe, the surface is smoother, and acid and alkali resistant, so it can also wet dust. Suitable for collecting all kinds of non - bonded dry dust. The product is not only used for dust and harmful gas control, but also metallurgy, mining, building materials, chemical industry and other industries to dust control ideal equipment.

The dust collector is divided into two parts, the upper part is the dust removal device, the lower part is the ash hopper, the flue gas inlet and outlet flange is in the upper part, the high flange is the outlet induced draft fan, the lower part is the flue gas inlet flange is connected with the boiler outlet flue.

The main exhaust pipe can be placed sideways or on top as required by the customer.

The working principle of

When dusty gas by the intake pipe into the ceramic multi-tube dust catcher of gas distribution chamber, then into the ceramic of cyclone and the annular space between the deflector, deflector that gas by the linear motion into circular motion, for the most part of rotating airflow along the cyclone body since the cylinder spiral downward, the pyramidal flow, dust gas produced in the process of rotating centrifugal force, Dust particles with a density greater than gas are thrown towards the cylinder wall. When the dust particles contact with the wall of the cylinder, they lose inertia force and fall down into the ash discharge mouth along the wall by the momentum of the inlet velocity and the downward gravity into the general ash hopper. Rotate falling out airflow to the cone bottom, due to the rotation of the cone contraction is in the same direction in the cyclone tube axis direction bottom-up continue to spiral flow net (gas), after ceramic cyclone exhaust pipe, into the exhaust chamber, by always vent discharge, for the convenience of dust removal system maintenance and deal with an emergency, the conditions for installation of a bypass flue.

Characteristics of ceramic multi - pipe dust collector

1, ceramic multi-tube dust catcher is our company research and development of a new generation of high quality low resistance dust removal equipment, compared to cast iron pipe filter higher dust removal efficiency, small resistance, uniform velocity, corrosion resistance, wear resistance, high temperature resistant, non clogging, long service life, simple operation and management, no cost, no secondary pollution, light weight, convenient transportation.

2. Compared with electrostatic precipitator, its total investment is only 1/3 of that of electrostatic precipitator.

3. Simple structure, easy operation and maintenance, no moving parts, small power consumption, no special auxiliary equipment, small footprint and less investment, basically no maintenance.

4. The dust collector is a energy-saving dust collector. Like static electricity and water film dust removal, it needs to overcome the forward resistance of flue gas to consume certain electric energy of the induced draft fan, but it does not need to consume energy itself. More than 95% of the materials used in this product are non-metallic materials available anywhere, which can save a lot of steel for the country.

5, operation flexibility, stable performance, not limited by the concentration of dust gas, temperature.

6, the ash outlet can use automatic ash discharge valve, can discharge ash in the boiler operation, do not need to stop the induced draft fan and then discharge ash.

Yancheng Jishengda Environmental protection Engineering Co., Ltd. has long been committed to the production and development of energy-saving and environmental protection equipment in the building materials industry. It is a manufacturer specializing in the production and sales of building materials machinery and energy-saving and environmental protection equipment in China. Adhering to technological innovation, the company has formed three pillar industries of environmental protection equipment and environmental protection engineering technology, powder selection equipment and grinding technology, drying equipment and drying engineering technology. Now we have more than 20 property rights patents: rotary kiln professional bag dust collector, large line spraying pulse long bag dust collector, efficient eddy current separator, coal mill dynamic separator, efficient double rotor separator, three cylinder dryer, circulation reciprocating multi-cylinder dryer and so on. Service Hotline:139-6208-6422